Summary

To address ongoing security concerns in our industry, Hanwha cameras do not have a default password. The user must set the admin user password before performing other functions of the camera. The password can be set via a web browser, using the Wisenet Device Manager, or at the NVR itself. This article provides instructions for setting the admin user password.

Setting the Password

To set the admin user password:

1. Open a web browser.
   

   NOTE: Google Chrome is preferred.

2. Enter the known IP; if DHCP is not running this will be 192.168.1.100
   
   
3. Set the password for the admin account. 

   NOTE: The password must meet the complexity rule shown in the image below. 

4. Click Apply.
   
   The camera will force you to log in using your new credentials.