Applies to Models: TID-600R

Summary:

Extension creation in 3CX PBX Version 14 and registration of the intercom to the PBX.

1. Login into 3CX Phone System Management Console

2. Click on Extensions

3. Click on Add

4. Provide the User Information for the TID-600R extension

a) Extension number (Contact the 3CX admin in order to utilize a valid numbering plan)

b) First and Last name (This can be as simple as the location of the TID-600R in the site)

c) Outbound Caller ID (When the calls from TID-600R is forwarded to an external party, this caller ID info will be displayed to the external party)

5. Provide the SIP Authentication information for the TID-600R extension

d) Authentication ID = Extension Number provided in step (a)

e) Authentication Password = Provide a password that will be used to register the TID-600R to 3CX

6. Click on the Phone Provisioning Tab

7. Select the Transport protocol required (TID-600R supports UDP, TCP, TLS)

8. Select RTP mode (for Secure communication, use Only secure or Allow secure when using TLS as transport protocol)

9. Select DTMF mode (TID-600R supports RFC2833 and SIP Info)

10. Verify Audio Codecs Listed are supported by TID-600R (TID-600R supports G711, OPUS, G722)

11. Click on the Options Tab

12. Verify that “Support Re-Invite” and “Support Replaces Header” are checked

13. 3CX supports the following Video Codec by default, TID-600R VOIP profile is an H264 profile

14. Intercom setting for the registration can be found from this link