Summary
This article applies to XNO-6120R/LPR and XNV-6120R/LPR, which have the ARTECO LPR Open platform application. If a user defaults the camera to the factory default settings, the open platform application and its activation licenses are removed.
This article describes how to retrieve the license key from the system while it is operational with the LPR application installed and activated. Use this procedure to record your license key in case you need to reinstall the application, as well as to archive a copy of your license.
NOTE: This process applies only to units that are activated
with the ARTECO LPR license. If you have lost the application
or have defaulted the camera to factory default before license
key retrieval, please refer to the re-installation process
identified in the Help Desk article
How do I reinstall the LPR - Application?
Retrieving the License
To retrieve the ARTECO LPR license information from the camera:
- Connect to the web interface of the camera. Chrome or Firebox web browsers must be used for proper operation.
- Use the Wisenet Device Manager to search your network if you are unsure of the camera’s IP address.
- Log into the camera using administrative credentials when prompted by the web browser.
- Enter the following case-sensitive command into the browser address bar:
NOTE: Change the IP address as per your camera’s
configuration. - Once the command has been executed, the web browser returns the manifest file contents, as shown below.
- Copy the license key (contained in the </WebLicense> section) and store it for future access.
- The license key is also printed in the quick reference guide that is included with the camera.