Summary:
WAVE defaults to optimize connections to all registered devices. This article describes how to optimize the camera, and how to disable WAVE from managing cameras.
Step By Step Guide:
Disabling camera optimization
- Open Wave Client.
- Press Ctrl+Alt+A.
The Allow System to Optimize Camera Settings checkbox appears on the General tab of WAVE. - Uncheck the box.
Note: WAVE will not actively manage the camera streams.
This is only recommended for systems where you want to retain older
camera system settings. - Click Apply to save the change.
Disabling the active stream management of the camera
- Open Wave Client.
- Click the name of the appropriate camera(s) listed.
- Select Camera Settings > Expert tab.
- Select the Keep camera stream and profile settings checkbox.
- Click Apply.
Note: All camera management is done in the camera; WAVE only pulls streams.
This action should only be used on underperforming cameras or
units with poor network performance.