Applies to Models: X and Q series cameras listed below

Summary:

The following X-Series and Q-Series (2MP with no audio) Cameras from Hanwha Vision are compatible with Genetec Stratocast with specific firmware.

Note: Q series Cameras ending with 'R1' require an update

Explanation of Behavior:

The cameras and their respective firmware listed below provide direct compatibility with Genetec Stratocast

Please note that the firmware in the table below must be installed to ensure compatibility.

All referenced firmware is available for download by CLICKING HERE.

X-Series Model	Firmware
XND-6080, XND-6080R, XND-6080V, XND-6080RV, XNV-6080, XNV-6080R	xnd6080_1.10_200414_1048
XND-8080R, XND-8080RV, XNV-8080R	xnd8080r_1.10_200414_1025
XNV-6011	xnv6011_1.00_200414_1050
XND-6010, XNV-6010	xnd6010_1.10_200414_1032
XNB-6000, XNO-6080R	xnb6000_1.00_200702_1800
XNB-6001	xnb6001_1.00_200414_1044
QND-6012R1, QND-6022R1, QND-6032R1, QND-6072R1, QND-6082R1, QNO-6012R1, QNO-6022R1, QNO-6032R1, QNO-6072R1, QNO-6082R1, QNV-6012R1, QNV-6022R1, QNV-6032R1, QNV-6072R1, QNV-6082R1	QNO-6082R1_1.41.01b_20220404