Applies to Models: PNM-9320VQP/PNM-9322VQP
Summary:
The Multi-Directional camera, PNM-9320VQP/PNM-9322VQP, has four interchangeable lens modules that are specific for this camera. They have the ability to be maneuvered on a track for maximum coverage. The PTZ feature is an essential part of this camera and it has the functionality to auto-track after a lens module uses the handover feature. This article provides instructions for adding PNM-9320VQP/PNM-9322VQP to exacqVision VMS.
Step By Step Guide:
To add PNM-9320VQP/PNM-9322VQP to exacqVision VMS:
- In order for this camera to be fully functional with other VMS (such as exacqVision), verify the supported device firmware from exaqVision.
- Once verified, download the supported firmware from our firmware repository.
When registering the cameras to exacqVision, you will notice that only the lens modules appear.
- The PTZ channel will need to be added in a different format. Apply the following syntax when adding the PTZ to exacqVision: <camera_ip address>#bank=2
Refer to the Samsung PNM-9322VQP.