Applies to Models: Genetec

Summary

This article provides a guide for adding a Wisenet camera to Genetec.

Adding a Camera

1. Open the Config Tool.
   
   
   
   
2. Click on the green plus symbol.
   
   
3. Select Video Unit.
   
   
   
   
4. Select Hanwha as the manufacturer. 
   
   

   NOTE: The IP address can be a single device or a range of devices.

5. Provide the proper credentials and click Add and close or Add. 
   
   
6. Repeat for further units.
   
   
   
   Once added to the system, the stream from the video unit appears.