Summary

HealthPro can monitor Hanwha Vision and AXIS cameras, WAVE servers, and the HealthPro Bridge server itself.

Monitorable Devices

• Direct-to-Cloud cameras: All models supported by Cloud Portal (Wisenet 5 or later). These can also receive firmware updates.
  
  
• HealthPro Bridge (Direct-to-Bridge) cameras: Wisenet 5 or later and SUNAPI v2.6.0 or later, AXIS VAPIX v1.0 or later (compatibility testing for individual products is required). Their firmware can also be updated by HealthPro.
  
  
• WAVE servers: v5.0 or later, using HealthPro Bridge.
  
  
• HealthPro Bridge servers: v1.6.0 or later. The software can also be updated by HealthPro.
  

  NOTE: Versions older than v1.6.0 have some limited features.

• WAVE Sync-connected servers, storage, and cameras (very small systems only). These cameras cannot receive firmware updates.

Monitoring WAVE Systems

A common scenario is using HealthPro to monitor and manage existing WAVE systems. To do this, a HealthPro Bridge is installed on-premises on a separate PC on the network, where it connects HealthPro to the WAVE server and its cameras. Some of these cameras are directly compatible with HealthPro Bridge and by being Direct-to-Bridge they also benefit from firmware updates and other licensable features. Those that are incompatible are still indirectly monitored at a more basic level via the WAVE system.

NOTE: When using HealthPro Bridge to monitor or manage devices, it must be 
installed locally on-premises and have network access.