Applies to Models: End of Support Samsung Techwin Model Products
Summary:
- Samsung Techwin products are no longer provided agent-assisted support.
Explanation of Behavior:
- Most legacy recorders on this list require the included remote to default them.
- Some have front panels with button combinations that serve the same purpose,
|
Product |
Model Name |
How to do |
Initial ID/PASSWORD |
|
SHR |
SHR-204X |
Press [MODE+2] button for 5 seconds |
admin / 4321 |
|
SHR |
SHR-208X / 216X / 508X / 516X |
Press [MODE+PTZ] button for 5 seconds |
admin / 4321 |
|
SHR |
SHR-3040 |
Master ID/PW : ADMIN / 21086888 |
admin / 4321 |
|
SHR |
SHR-504X / 604X |
1) In Login window, Press [STOP → 4 → 3 → 2 → 1 → STOP] 2) MENU >> System >> Profile >> Load Factory Default |
admin / 4321 |
|
SHR |
SHR-6XXX / 7XXX / 8XXX |
Press [MODE+PTZ] button for 5 seconds (Please press the buttons for more than 5 seconds. Then you will hear beep sound.) |
admin / 4321 |
|
SVR |
SVR-1600 / 400 / 420 / 800 |
Master Pass : 7201061673621082 |
none / 11111111(8digits) |
|
SVR |
SVR-1630 |
1) Except the first digits of the MAC address and other five digits convert decimal numbers. 2) In the decimal numbers, choose the number of the unit. Ex) MAC : 00-30-A1-80-12-88 decimal : 48-161-128-18-136 code : 81886 |
user : 0000, Admin : 9999 |
|
SVR |
SVR-1650 / 1640 / 950 |
Press [ - → 8 → 8 → 9 → 10 → 10 → 11 → 11] |
admin / 11111111(8digits) |
|
SVR |
SVR-1670 |
1) Keep pushing 'Enter' button after reboots 2) Go into 'Bootloader Maintenance Mode' (hear 3 beeps) 3) Press [1 → 6 → 11 → 16 → FUNC → ENTER] |
admin / 11111111(8digits) |
|
SVR |
SVR-430 |
MENU >>Enter in the right side >> 1441 2332 |
none / 11111111(8digits) |
|
SVR |
SVR-440 |
Press [ 3 → 4 → 1 → 4 → 2 → 3 → 1 → 1] |
admin / 1111 |
|
SVR |
SVR-450 / 940 |
Change from NTSC / PAL into PAL / NTSC system |
admin / 1111 |
|
SVR |
SVR-950 |
Press [ - → 6 → 6 → 7 → 7 → 8 → 8 → 9 → 9] |
none / 11111111(8digits) |
|
Product |
Model Name |
How to do |
Initial ID/PASSWORD |
|
SVR |
SVR-1645 / 1660C / 1680C / 3200 |
* Common Command - Factory Default Press [ FUNC → 1 → 2 → 1 → 3 → 1 → 4 → 1 → 5 → EXIT] - System Log Clear Press [ FUNC → 8 → 7 → 8 → 6 → 8 → 5 → 8 → 4 → PLAY ]
* 32/16 channels - Password Reset Press [ FUNC → 8 → 8 → 9 → 9 → 10 → 10 → 11 → 11]
* 9/4 channels - Password Reset Press [FUNC → 8 → 8 → 9 → 9 → 0 → 0 → 1 → 1] |
admin / 11111111(8 digits) |
|
Product |
Model Name |
How to do |
Initial ID/PASSWORD |
|
SRD |
SRD-1670 / SRD-1650 / SRD-1630 / SRD-1610 SRD-870 / SRD-850 / SRD-830 SRD-470 SRD-1640 / SRD-840 / SRD-440 SRD-442 SRD-1652 / SRD-852 SRD-1673 / SRD-1653 / SRD-873 / SRD-853 |
* DVRs without Front button After booting, press the button on remote control.
- Factory default Press Freeze → Alarm →Freeze →Alarm →Freeze →Return
- Locking all keys Press Stop →Freeze →Stop →Freeze →Menu
- Changing video resolution: Press Stop →Zoom →Stop →Zoom →Menu
* DVRs with Front button After booting, press the button on the front panel.
- Factory default Press [MODE+PTZ] button for 5 seconds |
admin/4321 |
|
SRD |
SRD-450 |
Press [Display + Pause] button for 5 seconds (Factory default) Press [Display + FF] for 5 seconds (ID/PW reset) |
admin / 4321 |
|
SRD |
SRD-480 |
* Common Command - Factory Default Press [ FUNC → 1 → 2 → 1 → 3 → 1 → 4 → 1 → 5 → EXIT] - System Log Clear Press [ FUNC → 8 → 7 → 8 → 6 → 8 → 5 → 8 → 4 → PLAY ] - Password Reset Press [FUNC → 8 → 8 → 9 → 9 → 0 → 0 → 1 → 1] |
admin / 11111111 (8digits) |
|
Product |
Model Name |
How to do |
Initial ID/PASSWORD |
|
SME |
SME-2220 SME-4220 |
It can be done with the remote controller. 1) Press 'Monitor' button 2) Menu → 4 → 6 3) Then the DVR monitor mode will be changed to 'factory mode'. 4) Use navigation down key to select '14. DVR Control Menu' and press 'ENTER key'. 5) Then you can see the below Menu in your monitor. Select 'DVR&PW clear' Menu using 'Navigation down key'. 6) Then press 'ENTER' key to clear ID & PW, and wait for about 40 sec. 7) Then press '6' key twice to exit 'Factory Menu'. |
admin / 4321 |
|
SDE |
SDE-120N SDE-3170 SDE-3002 |
Press [Display + Pause] button for 5 seconds (Factory default) Press [Display + FF] for 5 seconds (ID/PW reset) |
admin / 4321 |
|
SDE |
SDE-5001 / SDE-5002 SDE-4001 / SDE-4002 |
* DVRs without Front button
After booting, press the button on remote control.
- Factory default Press Freeze → Alarm →Freeze →Alarm →Freeze →Return - Locking all keys Press Stop →Freeze →Stop →Freeze →Menu - Changing video resolution: Press Stop →Zoom →Stop →Zoom →Menu
* DVRs with Front button
After booting, press the button on the front panel. - Factory default Press [MODE+PTZ] button for 5 seconds |
admin / 4321 |
|
Product |
Model Name |
How to do |
Initial ID/PASSWORD |
|
SRN |
SRN-1670D SRN-470 |
* NVRs without Front button After booting, press the button on remote control.
- Factory default Press Freeze → Alarm →Freeze →Alarm →Freeze →Return
- Locking all keys Press Stop →Freeze →Stop →Freeze →Menu
- Changing video resolution: Press Stop →Zoom →Stop →Zoom →Menu
* NVRs with Front button After booting, press the button on the front panel.
- Factory default Press [MODE+PTZ] button for 5 seconds |
|
|
SRN |
SRN-1000 |
Pressing the button during 5 seconds in the back of rear panel. |
|
|
SRN |
SRN-6450/3250 SNR-6400/3200 |
Select “FACTORY RESET” on the OSD in front of front panel |
|
Camera / Peripheral
CONFIDENTIAL HIDDEN KEY
|
Product |
Model Name |
How to do |
Initial ID/PASSWORD |
|
SWC |
SWC-101 / 104 / 306 |
Serial Comm. |
admin / admin |
|
SWC |
SWC-160 |
Serial Comm. |
admin / admin |
|
SWC |
SWC-304 |
RESET button |
admin / admin |
|
SCP |
SCP-2370 Series |
255 Preset In the password |
|
|
SCP |
SCP-3430 / SCP-2430 SCP-3250 / SCP-2250 |
Factory Default : Preset + 539 Password Reset : Preset + 540 |
|
|
SNC SNP |
SNC-550 / SNP-3300 / 1000 |
"Condition: These camera and PC should be connected on the same Local Network.
1. Make a folder, name is ‘PWChange’ in C drive root. C:\PWChange 2. Download and save total 5 files in this folder. (STWAxNetFinder.dll / DllWrsFtpCtrl.dll / PWChange.exe / PWChange_DLL.bat / STWAxConfig.dll) 3. Execute PWChange_DLL.bat * If this file is not included in the same folder, this file will not be executed . 4. Execute PWChange.exe 5. Fill in the Camera’s Mac address. Ex) 00:09:18:AA:BB:CC * You can find Mac address in the camera body or on Network manager. 6. Click ‘Change’ Button. 7. The message ‘Do you want to change the password?’ will be shown. 8. Click ‘Yes’. |
admin / 11111111 (8digits) |
|
SPC |
SPC-6000 |
123580 |
4321 |
|
SPC |
SPC-1010 |
Power on with pressing ‘Menu’ and ‘Auto’ key. * Keep pressing at least 3sec. Do not touch any other buttons and joystick during initialization. |
0000 |