Applies to Models: All Smartcam Models
1. Wireless connection (Wi-Fi Direct Setup)
To connect the camera via Wi-Fi, you need a router that provides a Wi-Fi connection function.
Press the Wi-Fi Direct button on the camera and follow the instructions for registration.
For the position of the Wi-Fi Direct button, please see the user manual.
If the Wi-Fi signal is weak because the camera is too far away from the router, the registration process may not work. In this case, relocate the camera to nearby the router.
2. Tab here to add registered camera
Even if a camera is already in use by another user, you can register the camera using the <Tab here to add registered camera> function.
3. WPS (Wi-Fi Protected Setup) function is not supported.