Applies to Models: SNK-B73047BW

Summary:

Required camera-to-NVR pairing procedure in the event the camera has not been paired or is displaying video loss for channel.

Step By Step Guide:

1. Verify camera is connected to power adapter.

Note: Prior to mounting the cameras please have the cameras and NVR in close proximity
for pairing.

2. Access the NVR menu by clicking on the three lines at the bottom left of the screen.

3. Click on Setup

4. If prompted, enter the login credentials for your NVR.

5. Select the Channel heading at the top of the screen

6. Click on Wireless Camera

7. Click on the orange camera icon for the corresponding channel.

8. Press and release the pairing button on the end of the camera cabling before the timer reaches zero (Figure 1)

Figure 1

Note: Repeat steps 1-7 for the remaining cameras