Applies to Models: All rack mountable Hanwha branded DELL Servers.

WARNING:

The steps below are for instructional purposes or emergency use only.
Hanwha Vision America recommends that only a qualified IT Professional attempt this process.
Hanwha Vision America and its affiliates are not responsible/will not accept responsibility for damage to hardware, hardware components, loss/corruption of data, or any damages resulting from using this process.

Summary:

If your rack-mountable Hanwha branded DELL Server did not come with installation instructions, follow the below steps.

Step By Step Guide:

1. Mount your server into a rack

Note: Non-Desktop Hanwha branded DELL Servers are intended to be rack mounted.
Failure to rack mount your server may impact performance or cause physical damage to the unit.

2. Connect a monitor to the server

Note: Every Hanwha branded DELL Server come with display adaptors (dongle); 
choose the correct adaptor for your application based on the server's GPU and display device.

3. Connect both power cables

Note: Most Hanwha branded DELL Servers larger than 1U have redundant power supplies.
This requires two power cables plugged into a power source.

4. Press the Power button in the front of the server, top right corner

5. The server will take about 3 minutes to show the video

6. Proceed through the standard Windows setup