Skip to main content

SPC-7000 Factory Default

  • Updated

SPC-7000 Factory Default

 First Download the files listed at the bottom of this article. 

- Download the BIST.zip.001, BIST.zip.002, and BIST.zip.003 to a folder on your computer. 

- Download this free program 7-zip from this link and install:

https://www.7-zip.org/download.html

- Highlight all three files an extract using 7-zip program. 

- Create a folder BIST and put the contents extracted in that folder

  1.    Copy BIST File

 - Copy attached file to USB memory stick

  1. Execute BIST

 - Insert USB stick into SPC-7000 and turn on SPC-7000

 - Check “BIST FOR SPC7000” message in LCD screen

  1. Execute Factory Default Command

 - Set PC IP address to 192.168.1.XXX

 - Execute following command in PC web browser

- URL : http://192.168.1.100/cgi-bin/adv/factory.cgi?operation=5

- Check “OK” message in PC web browser

  1. Reboot

- Reboot SPC-7000

  • This command initializes all configuration values such as registered devices, users and password.

Related articles